1. It is equipped with 32-bit ARM7 CPU, high-speed CACHE memory which are available for offline cutting. Moreover, data will be saved in the memory even the power is off.
2. This cutting plotter has 2000G cutting force. It can cut rigid materials, such as reflective film.
3. It's high precision steel axes guarantee the accuracy. And several strong pinch roller guarantee vinyl no offset.
4. It has three interfaces: USB, U disk and Serial Port.
Advantages
Up to 1000g pressure, coupled with tungsten steel engraving knife can cut through the imported diamond reflective film with smooth section.
2. High definition CCD Camera
⑴ Built-in Real Camera for auto print &cut (Real Camera should be with circle mark"●", not angle mark "L")
⑵ Support for all kinds of material, like high reflective material, colorful material, transparent material and etc.
3. Low use cost
⑴ Low electricity expenditure
⑵ The power consumption of the whole machine is less than 80W.
4. Multi-interface
⑴ USB cable
⑵ U disk
⑶ COM
5. Paper feeding pinch roller
⑴ Bespoke
⑵ High temperature and wear resistance
⑶ Long service life
Services
⑴ Apply to CORELDRAW, SIGNMASTER, FLEXI, ARTCUTand etc
⑵ Self-contained after-sales services
⑶ There is one year warranty period
⑷ Free technical support
⑸ Optional:
Technical Specifications
Model | XX49-CCD |
Media way | Floor stand |
Main board | 32Bit ARM7 CPU,128Mb, High-speed Cache memory |
Control panel | 11 silicon buttons+2.4 inch touch screen |
Driver | High speed, big power step motor, micro-step driver |
Maximum paper feed width | 1350mm |
Maximum cutting width | 1250mm |
Cutting forth | 2000g |
Cutting speed | 800mm/s |
Mechanical precision | 0.025mm |
Repeatable precision | <+-0.025mm |
Plotter pen | All types diameter 11.4mm plotter pen |
Plotter instruction | DM-PL/HP-GL |
Interface | USB/U disk/Serial port/WIFI |
Knife | Teneth imported blade |
Power supply | AC220V/110V, 50-60Hz |
Power consumption | <80W |
Package size | 1630*340*400mm |
Gross weight | 40kg |
Warranty | 1 Year |
Contact Us
Leave A Message
The first thing we do is meeting with our clients and talk through their goals on a future project.
During this meeting, feel free to communicate your ideas and ask lots of questions.
Recommended